6 products available
Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624.
Fischer Feritescope FMP30 suitable to measure ferrite content in austenitic steel and duplex steel. Supplied with Probe FGAB1.3-Fe and calibration standard set..Non-destructive measurement of the ferrite content in a range from 0.1 to 80 % Fe or 0.1 to 110 FN. Data memory up to 20,000 readings and 100 applications for measurement data and application-specific calibrations.
The GE DynaMic makes hardness testing quick and easy. The simple operation of this unit allows the user to position the impact devices and read the hardness value, all in a matter of seconds. The DynaMic provides readings in HV, HB, HRC, HRB, HS, HL, and M/mm2. This advanced unit will compensate for changes in testing direction. The Data Logger model can internally store hardness values along with statistical information. Features: • Measurements can be conducted in any direction without the need for calibration • Rebound hardness testing standardised according to ASTM A956 and DIN 50156 • Ergonomic, lightweight design (0.3 kg) • Test attachments for curved surfaces Applications: • Solid, coarse-grained components • Machine parts made of steel and cast aluminium alloys • Large series parts during production • Heavy forgings
Comprises LCD display and a detachable detector/drive unit. Parameters measured in Ra, Rq, Ry, Rz, Rt, Rp, R3z, Rk, Rpk, Rvk, S, Sm, Pc, mr, Mr1, Mr2, A1, A2, Vo units. Ranges: 350, 100, 50um & 10um, resolution from 0.01~0.4um. Tip radius 5mm. Data output. NiCd batteries.
DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit LCD display with battery indicator, display of voltage level. Alarm indicated on front panel, supplied with rechargeable battery, 10h charger, probe handle with neon and 2m length cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension. Dry conditions.
Pulse porosity (Holiday) detector. Detects pinholes in coatings and wrapping above 150um on metal substrates such as pipes and tanks. Can be used on dry or wet surfaces. 0~40kV output, 4 digit LED display of voltage, alarm sensitivity setting between dry and wet. Supplied with rechargeable battery, 10h charger, red probe handle and 2m length of rubber coated cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension and 80mm probe extension.
