General Industrial

Our specialist General Industrial test equipment includes Data Loggers, Process Calibrators, Infrared Cameras, and much more. These products are sourced from leading brands such as Hioki, Testo, Fluke, Druck, and Beamex just to name a few.

55 products available

Subcategories

Data Loggers

7 products

Browse

High Speed Waveform Recorders

2 products

Browse

Temperature Meters/IR Thermometers

3 products

Browse

Infrared Thermal Imaging Cameras

4 products

Browse

Industrial Process Calibrators

14 products

Browse

Wet and Dry Block Calibrators

7 products

Browse

Laser Rotational Shaft Alignment

2 products

Browse

Pressure Vacuum Gauges/Recorders

7 products

Browse

Flow Meters for Liquids & Gases

6 products

Browse

Tachometers/Stroboscopes

1 products

Browse

Combustion, Flue & Industrial Gas Analyser

2 products

Browse

Data Loggers

7 products

TechRentals offers an extensive selection of Data Loggers available for rent, providing precise data collection solutions for a wide range of industries.

Browse

High Speed Waveform Recorders

2 products

TechRentals offers a comprehensive range of High-Speed Waveform Recorders available for rent, providing advanced solutions for capturing and analysing high-frequency signals and waveforms.

Browse

Temperature Meters/IR Thermometers

3 products

Whether you require short-term or a managed service solution, TechRentals offers a range of Thermometers from reputable brand like Fluke, delivering precise temperature measurement solutions for various industrial and scientific applications.

Browse

Infrared Thermal Imaging Cameras

4 products

TechRentals offers a wide range of thermal imaging cameras available for rent, empowering you to uncover hidden issues and monitor thermal patterns in various applications.

Browse

Industrial Process Calibrators

14 products

TechRentals offers an extensive range of Industrial Process Calibrators available for rent, delivering precise calibration solutions for various industrial applications.

Browse

Wet and Dry Block Calibrators

7 products

TechRentals offers an extensive range of Wet & Dry Block Calibrators for rent, delivering precise and dependable temperature calibration solutions across diverse industrial applications.

Browse

Laser Rotational Shaft Alignment

2 products

TechRentals is your trusted source for Laser Rotational Shaft Alignment equipment rentals, offering cutting-edge tools to ensure precise alignment of rotating machinery.

Browse

Pressure Vacuum Gauges/Recorders

7 products

TechRentals offers a comprehensive range of Pressure Vacuum Gauges and Recorders available for rent, providing accurate measurement solutions for a diverse range of industrial applications.

Browse

Flow Meters for Liquids & Gases

6 products

TechRentals provides a comprehensive selection of Liquid and Gas Flow Meters available for rent, offering precise measurement solutions for various industrial applications.

Browse

Tachometers/Stroboscopes

1 products

TechRentals offers Tachometers available for rent, providing precise rotational speed measurement solutions for a wide range of industrial applications.

Browse

Combustion, Flue & Industrial Gas Analyser

2 products

TechRentals offers a range of dependable Combustion, Flue, and Industrial Gas Analysers available for rent.

Browse

All Products

Additel 681AEx Digital Logging Pressure Gauge 7 bar

Additel 681AEx digital pressure gauge. Range: -1 to 7 bar, (-100 to 700 kPa), (-15 to 100 psi). Gauge or Absolute pressure Data logging (up to 10,000,000 records) Intrinsically safe Bluetooth communication Accredited to ISO/IEC 17025 NATA certified

Additel 681AEx Digital Logging Pressure Gauge 1 bar

The Additel 681AEx Digital Logging Pressure Gauge 1 bar is a high-precision, intrinsically safe pressure measurement instrument designed for demanding industrial environments. Ideal for professionals in process industries, calibration labs, and hazardous locations, this advanced gauge enables accurate pressure monitoring, logging, and troubleshooting where safety and reliability are paramount. Manufactured by Additel, the Additel 681AEx Digital Logging Pressure Gauge 1 bar is engineered for both performance and safety. With a 1 bar pressure range, this device is perfect for low-pressure applications requiring precise data logging and real-time monitoring. The gauge features a robust, intrinsically safe design (ATEX/IECEx certified), making it suitable for use in hazardous areas. Its high-accuracy sensor, large backlit display, and extensive data logging capabilities ensure reliable results for pressure calibration, leak testing, and process monitoring. Rent or hire the Additel 681AEx to streamline your pressure measurement tasks with confidence and efficiency. Key Features: Intrinsically Safe Design: Certified for use in hazardous environments, ensuring operator safety and compliance. High Accuracy: Delivers precise pressure measurements with an accuracy up to ±0.02%FS, ideal for critical applications. Comprehensive Data Logging: Built-in memory for extensive pressure data recording, supporting detailed analysis and traceability. Large Backlit Display: Easy-to-read digital interface for clear visibility in all lighting conditions. Versatile Pressure Units: Supports multiple engineering units for flexible operation across various industries. Rugged Construction: Durable housing designed to withstand harsh industrial environments and frequent field use. Why Choose the Additel 681AEx Digital Logging Pressure Gauge 1 bar? Exceptional measurement accuracy for reliable pressure monitoring and calibration. Certified safety for use in hazardous and explosive atmospheres. Advanced data logging and user-friendly interface for efficient workflow. TechRentals provides the Additel 681AEx Digital Logging Pressure Gauge 1 bar on flexible rental terms, giving you access to premium equipment without the upfront cost of ownership. Backed by over 50 years of industry expertise, we help ensure accurate and efficient pressure measurement and logging. Enquire today to rent the Additel 681AEx Digital Logging Pressure Gauge 1 bar and streamline your pressure monitoring and calibration tasks. Not sure which equipment to hire? Call our friendly experts today and get the right solution for your project.

Beamex MC6 Multifunction Calibrator

NATA certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals with HART communication and Document Calibrator option included. Performs as a field-entry device (FED) allowing for the recording of non-calibration related maintenance results. Pressure modules included, -1 to 20 bar and 600 bar. DC voltage & current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation & measurement. Pressure accuracy EXT-600 bar 0.007% FS + 0.01% Rdg, INT-20 bar 0.005% FS + 0.01% Rdg, temperature coefficient ±0.001 % Rdg/degC outside 15 to 35 degC. Please enquire about our other MC6 configurations and pressure rangers.

Beamex MC6 Multifunction Calibrator PB

The Beamex MC6 Multifunction Calibrator PB is a versatile and high-precision calibrator designed for industrial applications. It is primarily used for calibrating and testing various process instruments, including pressure, temperature, and electrical signals. This advanced calibrator combines multiple functions into a single device, making it an essential tool for professionals in the field of instrumentation and calibration. The Beamex MC6 offers a user-friendly interface, robust construction, and high accuracy, ensuring reliable performance in demanding environments. It supports a wide range of calibration tasks, from simple measurements to complex calibration procedures, making it suitable for various industries, including oil and gas, power generation, and manufacturing. Key Features: Multifunction Capability: Combines pressure, temperature, and electrical signal calibration in one device. High Accuracy: Provides precise measurements with an accuracy of up to 0.005% of reading. Robust Design: Built to withstand harsh industrial environments with an IP65-rated enclosure. Intuitive Interface: Features a large, color touchscreen display for easy operation and navigation. Data Logging: Capable of storing calibration results and generating detailed reports. Versatile Connectivity: Supports various communication protocols, including HART, FOUNDATION Fieldbus, and Profibus PA. The Beamex MC6 Multifunction Calibrator PB is an indispensable tool for professionals seeking a reliable and efficient solution for their calibration needs. For more technical details, please refer to the manufacturer's website.

Beamex External Pressure Module

Beamex external pressure modules compatible with MC6, MC5, MC4, MC2 MC5-IS, MC2-IS and MC5P calibrators. Various rangers available, please inquire.

Compu-Flow C6 Doppler and Ultrasonic Flowmeter

Compu-Flow Model C6 is an industrial-grade Doppler ultrasonic clamp-on flow meter designed for non-intrusive flow measurement. The unit uses proprietary microprocessing technology to provide Doppler-based flow readings. The Model C6 is suitable for a range of industrial flow measurement applications where clamp-on installation is preferred.

DataTaker DT80M 5 to 15 Ch Logger includes Built in Modem

Includes a built in GSM modem for internet access to the device supports 2G and 3G networks (GSM/GPRS/EDGE/WCDMA). Measures voltage, current, resistance and frequency. Up to 5 analogue (+/-30V) sensor inputs. Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. Store up to 10 million data points in user defined memory. Generally used at sample rates of 1Hz and slower.

DataTaker DT80 Expansion Module

Channel expansion module for DT80 data loggers. Adds 20 full datataker channels to the logger

Druck DPI611 2 Bar Pressure Calibrator

Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from 95% vacuum to 2 bar/30 psi pneumatic pressure with 0.0185% FS accuracy. Calculates PASS/FAIL errors and documents results. User Guide stored in the memory of the instrument, 3-touch set-up for any application.

Druck DPI611 20 Bar Pressure Calibrator

Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from 95% vacuum to 20 bar/300 psi pneumatic pressure with 0.0185% FS accuracy. Calculates PASS/FAIL errors and documents results. User Guide stored in the memory of the instrument, 3-touch set-up for any application.

Druck DPI 612 200 bar Pressure Calibrator

Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 200 bar, accuracy 0.005 %FS. Calculates Pass/Fail errors and documents results. User Guide stored in the memory of the instrument, 3-touch set-up for any application. Certified ISO/IEC 17025.

Druck PV411A Multifunction Hand Pump Kit

Provides up to 700 bar hydraulic, 40 bar pneumatic pressures and vacuum to -950m bar. Built-in stroke adjuster, lower pressure fine control and tamper proof overpressure protection.

Emerson AMS Trex Device Communicator with HART & FFbus

The AMS Trex is an intrinsically safe HART and Foundation fieldbus device communicator. It allows technicians to configure, isolate, diagnose and repair problems while devices continue to run using the Loop power function and on board ammeter. Segment and loop diagnostic tools quickly validate loop and fieldbus segment characteristics for easy troubleshooting. This model has options L-"Device Communicator Plus Communication Module" and F-"HART + Foundation Fieldbus".

Emerson AMS Trex Device Communicator with HART

The AMS Trex is an intrinsically safe HART device communicator. It allows technicians to configure, isolate, diagnose and repair problems while devices continue to run using the Loop power function and on board ammeter. Segment and loop diagnostic tools quickly validate loop and segment characteristics for easy troubleshooting. This model has options L-"Device Communicator Plus Communication Module" and H-"HART".

FLIR E54 Infrared Thermal Imaging Camera

Temperature range -20 to 650 degC, IR resolution 320 x 240, 30Hz. Display 10cm 640 x 480 touchscreen, 1-4 continuous digital zoom, video recording, Wi-Fi, USB and Bluetooth enabled. IFOV 1.31 mrad. Image modes include infrared, visual, MSX and picture-in-picture. Features manual focus, moisture, insulation, above, below, interval measurement alarms and GPS image tagging. Applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive.

FLIR T640 Infrared Thermal Imaging Camera

FLIR high performance thermal imaging camera with on-board 5MP visual camera, 640 x 480 thermal resolution, IFOV 0.68, 8X continuous zoom, time lapse and GPS are just a few of its many features. The T640 has a temperature range -40 to 2,000 degC. Calibration certificate to 1,000 degC provided. If certification to 2,000 degC is required, please inquire.

Fluke 1524 Precision Handheld Thermometer

Precision portable, electronic thermometer with trending, memory for logging 15,000 data and time stamped measurements and 25 readings with statistics. Includes 5615 PRT probe, maximum immersion length 305mm, diameter 6.35mm. Temperature range -200 to 420 degC.

Fluke 54-2B 2Ch Data Logging Temperature Meter w Flukeview

Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy ±0.05% of reading +0.3 deg C. 500 point logging with date & time stamp. Also records min, max or avg. Logged data can be reviewed on meter or downloaded to PC using software included. Supplied with 2x 1m K type thermocouple leads -200 to 1,372 deg C. High temperature limit depends on thermocouple construction material. Custom TC provided have an approximate upper limit of 800 to 900 deg C.

Fluke 62 Max Plus

The Fluke 62 MAX+ Handheld Infrared Laser Thermometer delivers the accuracy you need. Just point, shoot, and read the temperature of many types of equipment. Get accurate readings form transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents.

Fluke 725 Process Calibrator

Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01% 22 mA max. Resistance msmt 0.05% 11 kohm max, source 0.01% 11 kohm max. Frequency msmt 5 counts 1 Hz - 50 kHz, source 1 count 20 Hz - 5 kHz. ‘K’ thermocouple msmt 0.3 deg C, source 0.3 deg C. Pt 100 RTD msmt 0.5 deg C, source 0.2 deg C. Will measure and simulate 4-20 mA,TC E N J K T B R S and C, 2, 3 and 4 wire RTDs and frequency. The unit operates from drycell batteries.

Fluke 754 Documenting Process Calibrator with HART

The Fluke 754 is a handheld, multi-function documenting process calibrator with HART communication. It is designed for the calibration, maintenance, and troubleshooting of test sensors, transmitters, and other instruments. The 754 allows for the testing of all common process parameters including volts, mA, Resistance Temperature Detectors (RTD's), thermocouples, frequency, and ohms. Compatible with all Fluke 700Pxx pressure modules, this device also allows for custom units, user-entered values during test, one and two-point switch testing, square root DP flow testing, and programmable measurement delays. Features: • Simultaneous source and measure capabilities • Create and run automated as found/as-left procedures • AutoStep - set an automated sequence of steps (with a delayed start if required) • Records and documents results

Fluke 773 Milliamp Process Clamp Meter

Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA with clamp. Source and simulate mA and voltage signals in circuit. 4-20mA scaled o/p

Fluke 789 Process Meter

The Fluke 789 ProcessMeter is a compact digital multimeter and mA loop calibrator solution. Features include standard multimeter functions with 2 to 20mA sink and source capability, with a 24V supply, HART 250 resistor and 20mA drive into 1200 ohms. Simultaneous mA and % of scale readout on mA output. 25% manual step plus auto step and auto ramp on mA output. Min/max/average/hold/relative modes. Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA DC 0.05% +2, frequency 0.005% +1. Certified ISO/IEC 17025.

Fluke 9170 Dry Block Temperature Calibrator -45 to 140°C

Fluke 9170 dry well calibrator temperature range -45 to 140°C in normal room conditions. This product has a large LCD display, numeric keypad, and an on-screen menu. The display shows the block temperature, cut-out temperature, stability criteria, and ramp rate. Certified ISO/IEC 17025.

Fluke Ti480 PRO Infrared Camera

Fluke Ti480 Pro thermal imaging camera, temperature range -10 to 1,000 degC, 640 x 480 thermal resolution (1280 x 960 with SuperResolution mode) and 0.93 mRad. Wireless connectivity to PC, Apple or Android. Image capture still or video with live streaming capabilities. MultiSharp focus provides image focus throughout the field of view and a built-in laser distance meter displays the distance from your target.

Fluke TiS75+ Thermal Imaging Camera

The Fluke TiS75+ camera has a 384 x 288 thermal resolution, features voice annotation, IR-PhotoNotes, and asset tagging. Additionally, it stores inspection notes and location information directly with the captured images for a proactive maintenance (PM) program. " Temperature range -20 to 550 degC " Manual focus " IR-Fusion

Grant TX150 Temperature Bath

Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100 deg C with water and 150 deg C with silicon oil. Features include digital temperature controller and display, timer, alarms, offset adjustment and more. ISO/IEC 17025 certified.

Hioki Kit of Three 9322 High Voltage True rms Interface

Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC mode for waveform monitor output DC to 3MHz, AC mode detection of power surge noise 1kHz~10MHz. Rectified true RMS output of DC & ac voltages. 40Hz~100kHz response speed 200ms or less. Max voltage DC 2kV, ac 1kV CATII, AC/DC 600V CATIII, balanced differential input 1/1,000 divider.

Hioki LR8431-20 10ch Memory Logger

Hioki LR8431-20 10 Channel Memory Logger with isolated channel to 60VDC which will take thermocouples. 10ms sampling USB interface and USB memory stick. Logging software included. Log directly to memory stick. Includes battery for 2.5hrs continuous operation.

Hioki MR6000-01 8 Analogue, 16 logic channel Memory Recorder

High Speed Memory Recorder 20MSample 8 channels 12bit Max. rated voltage to earth: 300 V AC, DC,16 logic channels with voltage detection probes 150V or 15V threshold . Touch screen display with PC rem ote operation.

Hioki MR8847-53 8 Analogue, 32 logic channel Memory Recorder

Hioki MR8847-53 Memory recorder with 8 analogue and 16 logic channels (16 logic probes supplied). High-speed 20MS/s,Fully Isolated Memory recorder. Analog unit 8966 has Max. rated voltage to ground: 300 V AC, DC

Jofra CTC-1205A Dry Block Temperature Calibrator 1200 C

NATA calibrated Jofra CTC-1205A dry well temperature calibrator. Range 100 to 1,205 degC. Accuracy +/- 2 degC, stability +/-0.1 degC. Immersion depth 110mm (with insulation plug 137mm). Supplied with insert with hole sizes 3.5, 5, 7 and 10mm.

Jofra CTC-660A Dry Block Temperature Calibrator 28 to 660 C

Jofra CTC-660A Dry Block Temperature with NATA certification. Range 28 to 660 degC. Accuracy +/-0.85 degC, stability +/-0.08 degC and resolution of 0.01, 0.1 or 1 deg. Immersion depth 115mm. Supplied with insert M01 (hole sizes, 9, 5, 6, 4, 4, 3mm). Various insert sizes available, please inquire.

Jofra CTC-660A Insert

Various insert sizes for the Jofra CTC-660A (only). Please inquire.

JOF,RTC-157A Insert

Insert for the Jofra RTC-157A (only). Please inquire.

Monarch PLT200-KIT Digital Contact/Non Contact Tacho

Hand held digital contact/non contact tacho kit. Ranges optical/non contact 5~200,000 RPM, contact 0.5~20,000 RPM. Display 5 digits, 5 alpha numeric LCD. Non contact operating range 90cm, tripod mounting. Direct contact tips and contact wheel supplied. Programmable for IPM, FT/M, YPM, cm/M, m/M, RPM, RPS, RPH and Totaliser up to 200,000. Output TTL pulse.

Panametrics PT900 High Penetration Transducers

Panametrics PT900 Transducer and fixture. The fixture is suitable for pipe larger than 150mm up to 1 meter. Transducer type #591 suitable for pipes from 150mm pipe to larger sizes, -40-130 deg C

Panametrics PT878GC-01 ultrasonic gas flow meter Kit

Portable non-contact gas flowmeter using transit-time principle. Compatible with metal or plastic pipes and supplied with transducer kit in the range 20~300mm. Suitable for use with compressed air, natural gas and other gases. Readout for flow velocity, actual or standard volumetric flow or mass-flow in numerical or graphic format. Internal logging for 100K flow data points. USB communications port for download to PC. Rechargeable battery for 8h continuous operation.

Panametrics PT900 Ultrasonic Flowmeter

Panametrics TransPort PT900 is a NATA accredited portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and 2 sets of transducers, one 12.5mm to 50mm the second 50mm to 600mm diameters with temperatures ranges from -40 to 210 deg C and -40 to 150 deg C depending on transducers supplied and clamping fixtures. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging to internal memory, accessed as external drive when plugged into a PC via USB. Setup and monitoring using Android or iOS device. Rechargeable Li-ion batteries and AC power supply/charger. Typical battery life approximately 14 hours.

Panametrics PT900E Ultrasonic Liquid Flow Energy Meter

Panametrics Transport PT900E is a NATA accredited portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and 2 sets of transducers, one 12.5mm to 50mm the second 50mm to 600mm diameters with temperatures ranges from -40 to 210 deg C and -40 to 150 deg C depending on transducers supplied and clamping fixtures. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging to internal memory, accessed as external drive when plugged into a PC via USB. Setup and monitoring using Android or iOS device. Rechargeable Li-ion batteries and AC power supply/charger. Typical battery life ~ 14 hours. Supplied with Energy measurement option to calculate energy flow rate and totalized energy using Analogue I/O. RTD temperature transmitter with range -10 to 150 deg C.

Polysonics Hydra SX30 Dual Freq Doppler Liquid Flowmeter

Dual frequency Doppler ultrasonic non-contact flowmeter. Velocity range 0.06 to 10m/s, accuracy +/-1%. Pipe size range 12~5,000mm diameter. Data logging for 90,000 points, with PC software and interface cable for download via RS232C interface. Transducer temperature range -40~122 degC. Analog output 4~20mA. Battery operated, 12h continuous use (8hr recharge)

Pruftechnik Tension chain and Tip rod Kit

Kit of addtional Tension chains and Tip rods for Pruftechnik Laser shaft alignment system

Pruftechnik Optalign Touch Standard Optical Alignment System

Pruftechnik Optalign Touch Standard optical alignment system with 5 axis precision sensors. Includes target, thermal growth and dial gauge input. Multipoint measurement. and Spacer measurement. Compact magnetic brackets. Reliability centre software included.

Softing BC-700-PB Profibus Tester 5, PB-T5

The PROFIBUS Tester 5 (BC-700-PB) is a powerful diagnostic and troubleshooting tool for testing cables, measuring signals and analysing the communication of PROFIBUS networks. Its battery-powered and provides a graphical display, allowing for quick results when working in stand-alone mode. In addition, the BC-700-PB supports the export of test results for advanced analysis.

Testo 174H Temp & Humidity Logger Kit of 20

Testo 174H temperature & humidity dataloggers Kit of 20 . -20~70DegC+/-0.5 Deg C 0~100%RH +/-4% (2~98%RH). 160000 readings up to 1min sample rate. 1 year battery life (@15min intervals)

Testo 175-H1 Temperature & Humidity Logger

Testo Temperature & Humidity Logger. Large Display. 3 year battery life, 1 million sample memory. RH 0 ~100% +/- 2%, temp -20~50 degC +/-0.4 degC. Includes USB interface to download data

Testo model 340 portable flue gas analyser

Testo 340 flue gas analyser. Includes O2, CO (h2 compensated), CO2 (calculated), NO & NO2 sensors. 335mm engine probe suitable for diesel and boiler testing with temperate probe, 350mm pitot tube, Bluetooth printer & easy emission software.

Testo 350 Flue Gas Analyser

Testo 350 Flue gas analyser with built in Peltier gas preparation (chiller). Measures O2, CO, NO, NO2, and SO2 concentrations. Calculates CO2 concentration. Ranges: O2 0-25% vol, CO with H2 compensation 0-10000 ppm, NO 0-4000 ppm, NO2 0-500 ppm, SO2 0-5,000 ppm, Comes 0600 7555 Engine probe with temperature up to +1,000 deg C. easy emission software, Battery and AC mains operation.

Testo 440 with Temperature Humidity probe

Testo 440 with 0636 9770 High precision Temperature and Humidity probe,Blutooth capable. Measuring range - 0 to 100 %RH and -20 to +70 deg C. Accuracy ±(0.6 %RH + 0.7% of m.v.) (0 to 90 %RH), ±(1.0 %RH + 0.7% of m.v.) (90 to 100 %RH) and ±0.3 °C (15 to 30 °C), ±0.5 °C for remaining meas. range. Resolution - 0.01 %RH and 0.1 °C

Thermoline TU3 Temperature Bath

The Thermoline TU3 Temperature Bath is a precision-controlled laboratory water bath designed for accurate temperature calibration, testing, and sample incubation. Ideal for professionals in research, calibration laboratories, and industrial quality control, the Thermoline TU3 Temperature Bath delivers reliable temperature stability and uniformity, making it essential for applications requiring consistent thermal environments. Manufactured by Thermoline, a trusted name in laboratory equipment, the TU3 Temperature Bath is available for rent or hire, providing a flexible solution for short-term or project-based needs. This temperature bath features a robust stainless steel tank, digital temperature control, and a wide operating range, ensuring precise and repeatable results. Whether you need to calibrate instruments, conduct thermal testing, or maintain samples at specific temperatures, the Thermoline TU3 Temperature Bath offers the performance and reliability required by technically minded users. Key Features: Digital Temperature Control: Achieve precise temperature settings and stability for accurate calibration and testing. Wide Temperature Range: Supports a broad operating range, suitable for various laboratory and industrial applications. Stainless Steel Construction: Durable tank ensures long-lasting performance and easy cleaning. Uniform Temperature Distribution: Advanced circulation system maintains consistent temperatures throughout the bath. Large Capacity: Accommodates multiple samples or instruments for increased productivity. Why Choose the Thermoline TU3 Temperature Bath? Delivers highly accurate and stable temperature control for critical laboratory processes. Engineered for reliability and ease of use in demanding professional environments. Versatile design supports a wide range of calibration, testing, and incubation tasks. TechRentals provides the Thermoline TU3 Temperature Bath on flexible rental terms, giving you access to premium equipment without the upfront cost of ownership. Backed by over 50 years of industry expertise, we help ensure precise and reliable temperature calibration and testing. Enquire today to rent the Thermoline TU3 Temperature Bath and streamline your laboratory temperature calibration and testing tasks. Not sure which equipment to hire? Call our friendly experts today and get the right solution for your project.

Additel 681AEx Digital Logging Pressure Gauge 20 bar

Additel 681AEx digital pressure gauge. Range: -1 to 20 bar, (-100 to 2,000 kPa), (-15 to 300 psi). " Gauge or Absolute pressure " Data logging (up to 10,000,000 records) " Intrinsically safe " Bluetooth communication " Accredited to ISO/IEC 17025 NATA certified

Additel 681AEx Digital Logging Pressure Gauge 70 bar

Additel 681AEx digital pressure gauge. Range: 70 bar, (6,900 kPa), (1000 psi). " Data logging (up to 10,000,000 records) " Intrinsically safe " Bluetooth communication " Accredited to ISO/IEC 17025 NATA certified " Ambient temperature logging

Additel 681AEx Digital Logging Pressure Gauge 700 bar

Additel 681AEx digital pressure gauge. Range: 700 bar, (70,000 kPa), (10,000 psi). " Data logging (up to 10,000,000 records) " Intrinsically safe " Bluetooth communication " Accredited to ISO/IEC 17025 NATA certified " Ambient temperature logging

Crystal XP2i Digital Logging Pressure Gauge 20 bar

Range -1 to 20 bar (300 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Crystal XP2i Digital Logging Pressure Gauge 70 Bar

Range -1 to 69 bar (1,000 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.