Non-Destructive Testing (NDT)

PosiTector 200 B & C Ultrasonic Coating Thickness Gauge

Defelsko PosiTector 200 Advanced ultrasonic coating thickness gauge with type B & C Probes. Measures coating thicknes over wood, concrete, plastics, composites etc. Will measure up to 3 individual layer thickness in a multi-layer system and features a graphic readout. Supplied with both B, 13~1000um for wood, plastic and composites and C probes 50~3800um for coatings on concrete, fibreglass etc. Accuracy is +/- 2um +3% of reading.

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Tester

Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standards and carry pouch. Measurement range 0 to 1500um or 0 to 60 mils (selectable). Tolerance +/- 1um +1% of reading 0-50um, +/-2um +1% greater than 50um. Resolution 0.1um. Backglow display, HiLo limits audible & visible alerts when measurements exceed specified limits. Continually displays updates average, standard deviation, min/max thickness and number of readings while measuring. Built in USB, Bluetooth and Wifi for downloading readings.

Defelsko Positest Pull Off Adhesion Tester for Con & Metal

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624.

Fischer FMP30 Feritscope

Fischer Feritescope FMP30 suitable to measure ferrite content in austenitic steel and duplex steel. Supplied with Probe FGAB1.3-Fe and calibration standard set..Non-destructive measurement of the ferrite content in a range from 0.1 to 80 % Fe or 0.1 to 110 FN. Data memory up to 20,000 readings and 100 applications for measurement data and application-specific calibrations.

GE DynaMic rebound hardness tester

The GE DynaMic makes hardness testing quick and easy. The simple operation of this unit allows the user to position the impact devices and read the hardness value, all in a matter of seconds. The DynaMic provides readings in HV, HB, HRC, HRB, HS, HL, and M/mm2. This advanced unit will compensate for changes in testing direction. The Data Logger model can internally store hardness values along with statistical information. Features: • Measurements can be conducted in any direction without the need for calibration • Rebound hardness testing standardised according to ASTM A956 and DIN 50156 • Ergonomic, lightweight design (0.3 kg) • Test attachments for curved surfaces Applications: • Solid, coarse-grained components • Machine parts made of steel and cast aluminium alloys • Large series parts during production • Heavy forgings

GE Everest Ca-Zoom

GE Everest Ca-Zoom and hand-held controller is a portable, case-mounted, camera controller with real-time, multitasking software operating system which supports file storage on 64 MB of internal flash memory and CompactFlash removable storage media. Provides for integrated image capture and full motion video recording capabilities. Includes connectors for camera, handheld controller, video input/output, USB streaming, and keyboard for text generation. Supplied with 30 meter camera head cable and Extension Pole 1.8 to 3.6m. Camera heads must be chosen separately, see model GE,EVEREST PT-70 and GE,EVEREST PTZ-140.

GE Everest PTZ-140 Camera Head

The PTZ-140 is 140mm diameter colour camera module (fits through a 140mm opening) and features a 360deg pan, 234deg tilt, 36x optical and 12x digital zoom, high-intensity lighting and waterproof packaging to 45 m or 4.5 bar (when pressurised). Requires the GE,EVEREST CA-ZOOM to operate.

GE Everest PTZ-70 Camera Head

The PTZ-70 camera is 70 mm in diameter (fits through a 76mm opening) and features 10x optical zoom and 4x digital zoom for a total of 40x zoom. Eight 5-watt LED lights with variable intensity control, 360 degree continuous pan direction and 270 degree tilt capability. Waterproof to 45m or 4.5 bar (when pressurised). Requires the GE,EVEREST CA-ZOOM to operate.

Mitutoyo SJ-210-NATA Surface Roughness Tester

Comprises LCD display and a detachable detector/drive unit. Parameters measured in Ra, Rq, Ry, Rz, Rt, Rp, R3z, Rk, Rpk, Rvk, S, Sm, Pc, mr, Mr1, Mr2, A1, A2, Vo units. Ranges: 350, 100, 50um & 10um, resolution from 0.01~0.4um. Tip radius 5mm. Data output. NiCd batteries.

Olympus 27mg Pocket Thickness Gauge

Range 1~500mm, fast min mode. Resolution 0.01mm. Probe operates -20~150 DegC.

Olympus 38DL Ultrasonic Thickness Gauge

The Olympus 38DL Plus Ultrasonic Thickness Gauge performs non-destructive measurements. This unit is supplied with D790-SM and D7906-SM transducers suitable for steel. Capable of THRU-COAT and Echo-to-Echo measurements on painted and coated surfaces. This handheld device is commonly used to measure the remaining thickness of pipes, tubes, tanks, pressure vessels, hulls, and other structures affected by corrosion or erosion. Colour transflective VGA screen, Rugged design for IP67. Data logging capability

Olympus 38DL thickness gauge probe

Probes suitable for Olympus 38DL thickness gauge 1 x M2008 Probe 1 x M202-RM Robe 1 x M1036 Probe 1 x M109-RM Probe

Olympus IPLEX GL 2m x 4mm Handheld Videoscope

Olympus IPLEX G Lite 2 meter, 4mm diameter handheld videoscope has the following features; • Daylight viewing monitor • 60fps for smooth video and still imagers • Dynamic image optimisation, reduces halation, balances exposure and optimises gain quality • Noise reduction, minimises noise and ensures accurate colour reproduction • Constant video recording and video bookmarking • Wireless image sharing (with iOS app "IPLEX IShare" only)

Olympus IPLEX GL 3.5m x 6mm Handheld Videoscope

Olympus IPLEX G Lite 3.5 meter, 6mm diameter handheld videoscope has the following features; • Daylight viewing monitor • 60fps for smooth video and still imagers • Dynamic image optimisation, reduces halation, balances exposure and optimises gain quality • Noise reduction, minimises noise and ensures accurate colour reproduction • Constant video recording and video bookmarking • Wireless image sharing (with iOS app "IPLEX IShare" only) • Optional UV and IR light sources

Olympus IPLEX GT 7.5m x 6mm Portable Industrial Videoscope

The Olympus IPLEX GT is designed for the visual inspection of heat exchangers, turbines, gearboxes, automotive parts, aircraft, and other industrial machinery. This lightweight videoscope comes with a 7.5m long, 6mm diameter tungsten braided insertion tube. Record still images and video simultaneously with Smart Video. Features: • 8" LCD monitor • Easy-to-use touch screen and hot key controls • Smart Video • TrueFeel articulation • Compliant to MIL-STD-810G

Olympus IPLEX RX 3.5m x 4mm Videoscope with Measurement

Olympus IPLEX RX, battery powered videoscope. 3.5 meter x 4 mm insertion tube, 4 way, 130 deg articulation and 120 deg FOV. Stereo Measurement functions, Distance, Point-to-line, Depth and Area. Applications include inspection of heat exchangers, turbines, gearboxes, automotive parts and aircraft. Still and video recording to USB flash, approx 3,400 images and 30 mins per 1 GB.

Olympus OmniScan MX2 Phased Array Flaw Detector

Second generation OmniScan MX2 with 32:128PR phased array acquisition unit, including a UT conventional channel. Included weld software option, ToFD software option and Multigroup software option. Suitable for weld inspection, composite inspection, corrosion inspection etc…

PCWI 30kV DC Porosity, Holiday Detector

DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit LCD display with battery indicator, display of voltage level. Alarm indicated on front panel, supplied with rechargeable battery, 10h charger, probe handle with neon and 2m length cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension. Dry conditions.

PCWI 40kV Pulse Porosity (Holiday) Detector

Pulse porosity (Holiday) detector. Detects pinholes in coatings and wrapping above 150um on metal substrates such as pipes and tanks. Can be used on dry or wet surfaces. 0~40kV output, 4 digit LED display of voltage, alarm sensitivity setting between dry and wet. Supplied with rechargeable battery, 10h charger, red probe handle and 2m length of rubber coated cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension and 80mm probe extension.

Everest Ca-Zoom PTZ HD Camera System

The Everest Ca-Zoom PTZ HD Camera is a high-performance pan-tilt-zoom industrial inspection system designed for critical use in oil and gas, mining, pharmaceutical, and nuclear power industries. Built for harsh environments, it delivers exceptional Full HD clarity and long-duration video recording. Supplied with two interchangeable HD camera heads: PTZ HD30 – Full HD (1920x1080), 1/2.8" CMOS sensor with 2.38 MP and 4 high-intensity LEDs. PTZ HD10 – Full HD (1920x1080), 1/3" CMOS sensor with 5.14 MP and 10 LEDs for low-light visibility. Designed for versatility, it includes a 256 GB SSD (6+ hours recording), 30m cable, and 6ft deployment pole. The IP68-rated housing is waterproof to 50m when pressurised, ideal for submerged or hazardous inspections. Perfect for detailed remote visual inspections, the Everest Ca-Zoom PTZ HD Camera combines image quality, rugged build, and practical features for professionals needing reliability and precision.

Evident EPOCH 650 Ultrasonic Flaw Detector

EPOCH 650 Ultrasonic Flaw Detector is designed to meet the requirements of ISO 22232-1. Standard dynamic DAC/TCG and onboard DGS/AVG. Available test modes Pulse Echo, Dual, or Through Transmission.

Evident NORTEC 600D Eddy Current Flaw Detector

NORTEC 600D Eddy Current Flaw Detector is designed to meet the requirements of IP66 and EN-15548 compliant. N600D models supports Dual frequency and mixing, Conductivity and coating thickness measurement and Rotary scanner mode.

Evident OmniScan X4 PAUT Flaw Detector

OmniScan X4 64:128PR Phased Array instrument with 64 pulsers and 128 receivers, 2 UT P/R channels. TFM, FMC acquisition capability. Loaded with the latest revision of MXU 6.x software Detect and interpret challenging flaws and identify damage earlier with the powerful, yet portable OmniScan™ X4 multitechnology flaw detector. Exploit its versatile PA, faster TFM, innovative PCI, and efficient twin TFM/PCI to perform rapid and reliable inspections of welds and components.

Evident Splitter Connector for OmniScan unit

The Evident Splitter Connector for OmniScan unit is a specialised accessory designed to enhance the connectivity and versatility of your OmniScan flaw detector system. Ideal for professionals in non-destructive testing (NDT), this splitter connector enables seamless integration of multiple probes or accessories, streamlining complex inspection workflows and improving productivity on-site. Manufactured by Evident Scientific, the Evident Splitter Connector for OmniScan unit is engineered for reliability and precision. This essential component allows users to rent or hire a robust solution for advanced ultrasonic testing, phased array inspections, and other critical NDT applications. Its durable construction and precise signal management ensure optimal performance, making it a valuable addition to any professional’s toolkit for industrial inspections, asset integrity assessments, and quality control tasks. Key Features: Multi-Channel Connectivity: Supports simultaneous connection of multiple probes or accessories for efficient phased array and ultrasonic testing. Robust Signal Integrity: Maintains high-quality signal transmission, minimising interference and ensuring accurate data collection. Durable Construction: Built with industrial-grade materials to withstand demanding field environments and frequent use. Seamless Integration: Designed specifically for compatibility with OmniScan units, ensuring plug-and-play operation without additional configuration. Compact and Portable: Lightweight design makes it easy to transport and deploy in various inspection scenarios. Why Choose the Evident Splitter Connector for OmniScan unit? Delivers reliable and precise connectivity for advanced NDT inspections. Enhances workflow efficiency by supporting multiple probe configurations. Engineered for durability and consistent performance in challenging environments. TechRentals provides the Evident Splitter Connector for OmniScan unit on flexible rental terms, giving you access to premium equipment without the upfront cost of ownership. Backed by over 50 years of industry expertise, we help ensure accurate and efficient non-destructive testing operations. Enquire today to rent the Evident Splitter Connector for OmniScan unit and streamline your ultrasonic and phased array inspection tasks. Not sure which equipment to hire? Call our friendly experts today and get the right solution for your project.

Mitutoyo Pro360 Digital Protractor model 950-317

Digital Protractors to measure inclination values on an easy-to-read LCD. Measurements are generated by an electronic gravity sensor. Full 360° range (90° x 4). Alternate reference (zero), Reading hold. Display remains upright to view at all angles. (950-317, Pro 360 Model). Accuracy: ±0.1deg Level ±10 deg, Plumb ±10 deg, ±0.2 deg Maximum error, Repeatability: ±0.1 deg and Resolution: 0.1 deg

Evident UT Probe Kit

Ultrasonic Probe Kit with Various probes and wedges.

Evident SteerRover Industrial Scanner

SteerRover Scanner for Weld Inspection and Corrosion Mapping. Fully automated, steerable motorised 2-axis scanner for inspections of large ferromagnetic surfaces, such as pressure vessels and tanks, and achieve reliable phased array (PA) ultrasonic testing of areas that are difficult to reach.

Evident Phased Array Probe Kit

Phased Array Probe Kit with Various probes, Wedges and Encoder. Please contact TechRentals for probes supplied.

Evident Nortec600 Weld Scan Probe Kit

NEC-8196L WELD INSPECTION KIT for Nortec N600D. Supplied with PowerLink version (7 pin LEMO connectors) containing 1 each of the following: WLD-5-63/7L (9403362) WLD-8-55/7L (9403356) NEC-2236/7L (9403361) SRSM-51020S-WLD (includes certification) WLD-SAMPLE (does not include certification) and CL/SC/6 cable

Evident HydroFORM2 Industrial Scanner

HydroFORM semiautomated scanner for Corrosion Mapping. 2-axis encoding phased array (PA) solution, enables fast and reliable wall-thickness mapping and mid wall damage detection by acquiring high-resolution data of large surfaces in minimal time.

Evident Cobra Scanner