Fluke 5500A Multi Product Calibrator

SKU: FLU,5500A

Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous voltage outputs or voltage & current. Simulates power with phase control, resistance, capacitance, thermocouples and RTDs. Selectable ranges include the following outputs VDC from 0~1.02kV, VAC from 1mV~1.02kV with output from 10Hz~500kHz. AC current from 0.01µA~11A with output from 10Hz~10kHz. DC current from 0~11A. Resistance values from short circuit to 330Mohm. Capacitance values from 330pF~1,100µF. Temperature t/c B, C, E, J, K, L, N, R, S, T, U, RTD Pt385 100ohm, Pt3926 100ohm, Pt3916 100ohm, Pt385 200ohm, Pt385 500ohm, Pt385 1kohm, Ni120 120ohm & Cu427 10ohm.

Need this equipment?

Add to your quote cart and submit a request. We'll get back to you within 24 hours with pricing and availability.

Call us: +61 2 9564 8623

Related Equipment

Elspec G4500 Portable PQA with GPS receiver

Portable PQA with GPS receiver to to measure, store & analyze (continuously) waveform signals. Includes G4500 with 4x 3000A Flexible Current Clamps and GPS Receivers, Suitable for Applications like Utilities (Transmission, distribution, generation) and Energy Consumer (Critical power, industrial, commercial, etc.)

C.Scope DXL4 and SGV4 Cable and Pipe Locator

Cable and pipe avoidance and location tool with depth measurement. Simultaneous dual 33+131 kHz frequency will assist in the detection of smaller buried pipes and cables such as telecoms, cast iron and street lighting spurs. 4 available power levels up to 1 watt and depth detection approximately 3 meters (depending on soil type and operating mode). Four detection modes; Power, Radio, Generator and Allscan. Features a Dynamic Swing Sensor to aid in cable and pipe location.

PosiTector 200 B & C Ultrasonic Coating Thickness Gauge

Defelsko PosiTector 200 Advanced ultrasonic coating thickness gauge with type B & C Probes. Measures coating thicknes over wood, concrete, plastics, composites etc. Will measure up to 3 individual layer thickness in a multi-layer system and features a graphic readout. Supplied with both B, 13~1000um for wood, plastic and composites and C probes 50~3800um for coatings on concrete, fibreglass etc. Accuracy is +/- 2um +3% of reading.

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Tester

Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standards and carry pouch. Measurement range 0 to 1500um or 0 to 60 mils (selectable). Tolerance +/- 1um +1% of reading 0-50um, +/-2um +1% greater than 50um. Resolution 0.1um. Backglow display, HiLo limits audible & visible alerts when measurements exceed specified limits. Continually displays updates average, standard deviation, min/max thickness and number of readings while measuring. Built in USB, Bluetooth and Wifi for downloading readings.